Gaodetec foamed concrete block equipment
We all know that foamed concrete block equipment is not a separate piece of equipment in operation, it is produced with a complete set of production lines at work. Mainly included components: foam generators, screw conveyors, mixers, foam concrete pumps, and foam concrete block cutters. Each part has its own special functions and is indispensable, so it is very important to maintain the equipment and troubleshoot.
So the following four points tell you how to judge the failure and troubleshooting of foam concrete block equipment. (1) Foamed concrete block equipment requires many motors to run at the same time during operation. Some motors are difficult to ensure no gap fit due to equipment and poor lubrication. When used, they should be lubricated frequently to ensure the positive running of the motor. Reduce wear and tear. (2) Foamed concrete block equipment will have some leakage during operation. This phenomenon is mainly caused by the vibration of the parts and the heat of some parts. Therefore, the joints of each part should be carefully checked during use. (3) In use, it may cause mechanical failure due to improper operation of workers. Therefore, workers must be trained in relevant aspects to understand the structure, operation mechanism and performance of various parts of the equipment and reduce unnecessary losses. (4) It is necessary to emphasize that the looseness of foamed concrete block equipment must be paid enough attention. Only by ensuring that every part of the machine meets our requirements can we guarantee the speed and quality of construction and protect workers. Safety. So what we have to do is prevent it from happening.
The post-maintenance of foamed concrete block equipment is also essential, mainly by the following three parts:
First, the maintenance of the cutting machine should be done well. The cutting machine operation condition will affect cutting dimensional accuracy. Therefore, it is necessary to strengthen the maintenance work of the cutting device transmission device and the wire positioning device.
Second, do a good job of maintenance and maintenance of the mixer, clean the mixer regularly, replace the worn mixing blades in time, and ensure that the mixing paddles and their accessories are intact.
Third, check whether the blanking valves are well sealed to prevent the temperature from being too low to freeze the valve.
The aerated block equipment is used in winter to prevent frost. When the temperature is too low, the motor can be covered with felt to prevent freezing.
When purchasing foamed concrete block equipment, we must choose high quality and low price products, and only when the maintenance is in place, can the equipment last longer, so that the equipment can create more value for us, save energy consumption, and maximize It improves the operating efficiency of the equipment and thus reduces the production cost per unit of product. The foamed concrete block equipment produced by Gaodetec fully meets the above requirements.
